Sinoah (Tianjin) Agricultural Machinery Co.,Ltd

 

• Name: Pressure compensated drip irrigation belt production line
• Brand: Sinoah
• Model: Noah-LY-1
• Product thickness:0.4-1.2mm
• Payment: T/T, L/C, etc
• Application:water-saving irrigation in agriculture
• MOQ: 1piece
• Supply capability:30 piece/month
• Delivery Time:45days

 

 

We are China's drip irrigation belt production line manufacturers, our production line can produce to meet the needs of various regions and various agricultural scenarios. Product specifications are diversified, product design is simple, easy to install and maintain.

 

 

 

Built-in pressure compensation drip irrigation belt production line, with a variety of flow, wall thickness and spacing of the setting range, the compensation effect is stable, the working pressure range is large, to ensure that the drip irrigation system has enough irrigation uniformity, has a wide flow channel, a larger filter surface and low static loss, compared with the laying length is larger, has a strong terrain adaptation ability. It can be widely used in desert, hills, mountains, woodland and other terrain relief with large land, is an ideal choice for a variety of crops.

 

 

Pressure compensation mechanism:

Pressure compensated drip irrigation belt: This drip irrigation belt is designed with a pressure compensated mechanism that maintains a relatively constant flow and irrigation uniformity throughout the drip irrigation line, even on longer irrigation lines or in higher terrain areas. This is achieved by integrating special pressure compensators inside the drip irrigation belt.

Ordinary inset drip tape: Ordinary drip tape may not have a pressure compensation mechanism, so it may be affected by changes in water pressure throughout the irrigation line, resulting in larger drops in some areas and smaller drops in others.

 

Irrigation uniformity:

Pressure compensated drip tape: Thanks to its pressure compensated mechanism, this drip tape provides more uniform irrigation along the entire irrigation line, ensuring that each drip head is dripping at a similar flow rate, unaffected by fluctuations in water pressure.

Conventional inlaid drip tape: On longer irrigation lines, or with large water pressure fluctuations, conventional drip tape may irrigate more in some areas and less in others, resulting in uneven irrigation.

 

Application scenario:

Pressure compensated drip irrigation belt: Suitable for irrigation systems over large areas, long distances or higher terrain to ensure uniform irrigation under different conditions.

Common embedded drip tape: suitable for relatively small irrigation systems with low uniformity requirements.

 

Core component Equipment 1:

 

Dropper screening device and High speed dripper conveyor

Type 1480

Dropper size: 23mm*6mm*2.1mm,

> 2300 PCS/min;

Servo motor (Panasonic) : 750w

3000 PCS/minute

Applicable dropper size: 23mm*6mm*2.1mm

Core component Equipment 2：

 

Traction punch device and control system

four-motor

Punch servo motor (Panasonic) : 750w

Traction servo motor (Panasonic) : 3kw

Maximum punching speed > 3200 / min

Maximum speed of traction > 360 m/min

 

Core component Equipment 3：

 

Double station automatic winding device

Servo motor: 3kw

Driver and motor: Panasonic

Maximum speed of winding > 450 m/min

 

http://www.noahagro.com/